top of page
Search
Silver aluminum column covers and metal panels along the base of the Federal Reserve Bank of Minneapolis

Retrofit Column Covers: How to Clad Existing Columns in a Renovation

Writer: CNC Metalcraft
CNC Metalcraft
18 hours ago
4 min read

Renovations often leave a building with columns nobody wants to look at: chipped concrete, painted steel, mismatched old cladding or columns that no longer fit a new lobby or storefront. Metal column covers are one of the quickest ways to make those supports look new without touching the structure. This guide covers how a retrofit column cover project differs from new construction and what to gather before you ask for a price.

Why metal covers work well for retrofits

  • They do not change the structure. A cover is fastened around the existing column on its own clips and angles.

  • They are made off site. Covers are fabricated and finished in the shop, then crated to the job, so time spent working in an occupied building is limited.

  • They hide a lot. Rough edges, old fireproofing profiles and uneven surfaces disappear behind a clean metal face.

  • They match the new design. Round, square, rectangular and custom profiles are available, with capitals, bases, rings and reveals, in a wide range of colors and finishes.

Sure-Panel® column covers start at an 8 inch minimum diameter and run up to 15 feet in a single piece. Taller columns use stacked sections with hairline or butt joints.

Step 1: Survey what is really there

Existing buildings rarely match their original drawings. Before a cover can be drawn, someone has to confirm, for each column:

  • The actual size and shape, including any out-of-plumb or out-of-square condition.

  • Floor-to-ceiling height and what happens at the top: ceiling, soffit, beam or open structure.

  • What is at the base: finished floor, curb, base trim or new flooring still to come.

  • Obstructions such as conduit, sprinkler pipe, outlets, fire alarm devices, signage or storefront that tie into the column.

  • What the cover can attach to.

A clear photo of each column type plus field dimensions makes the shop drawing stage much faster. Our fabrication partner, CNC Metalcraft®, prepares the shop drawings, and those drawings are where the cover size, clip depth and joint locations are set.

Step 2: Size the cover around the worst case

A cover has to clear the largest, most out-of-plumb part of the existing column, plus room for its attachment. The installation guide for Sure-Panel® hairline covers shows clip angles set to a depth called out on the shop drawings (dimension "A"), with base angles at 24 inches on center maximum and PVC shims under the clips to separate dissimilar metals. That clip depth is what lets one cover size fit around an imperfect column.

Remember the size thresholds as you set the cover diameter: round covers over 34 inches and square covers over 26 inches require vertical joints. The column cover sizing guide lists every limit.

Step 3: Choose the joint for the conditions

All three Sure-Panel® joints can be used in a retrofit. The choice usually comes down to exposure and look.

  • Caulk joint: often chosen for retrofits over existing exterior columns, canopies and entries exposed to wind-driven rain. Mounting clips are fastened to rout-and-return column legs and hard-fastened to the structure, and joints are sealed with foam backer rod and silicone-based caulk. Sealant color can match the cover.

  • Hairline joint: the seam nearly disappears, which makes it a favorite for renovated lobbies and interiors.

  • Reveal joint: a deliberate vertical reveal with a "C" channel insert, useful when the new design has other reveals to line up with.

Step 4: Choose material and finish

The same materials used in new construction apply: painted 3003-H14 aluminum or 5005 anodic-quality aluminum (.090" to .125"), 4 mm or 6 mm FR-core ACM, or 16 gauge 304 or 316 stainless steel. Finishes include PVDF/Kynar, powder coat, anodized, brushed stainless, mill and primed.

For high-traffic retrofit areas where carts, luggage or vehicles might hit the column, solid aluminum plate is usually the more forgiving material. See ACM vs. aluminum plate for the trade-offs.

Step 5: Plan the work in an occupied building

Retrofit covers are often installed while the building is open. A few general practices help:

  • Have the covers fully shop-fabricated and labeled to the shop drawings so field work is assembly, not fabrication.

  • Store crates indoors, away from the elements. If they must sit outside, raise them off the ground on a plastic cover, slope them so water drains, support them so they don't bow and cover them with a loose waterproof tarp that still lets air circulate.

  • Moving crates from cold to warm areas can cause condensation between covers, so dry any wet bundles right away.

Those storage steps come from the Sure-Panel® Column Cover Installation and Storage Guide, available on the Specs & CAD page.

Example: panels and covers from one shop

At the Federal Reserve Bank of Minneapolis, CNC Metalcraft® fabricated about 3,200 sq ft of Sure-Panel® Wet Seal ACM plus 8 custom column covers in .125" 3003-H14 aluminum plate. Both scopes were drawn and built by the same Burnsville, MN team, which is the advantage of sourcing panels and covers together.

Retrofit column cover FAQ

Can column covers go over existing concrete or steel columns? Yes. Covers attach on clips and angles around the existing column. Shop drawings set the clip depth for each condition.

Which joint is best for an exterior retrofit? The caulk joint is the usual choice for exterior columns exposed to wind-driven rain. The hairline and reveal joints are popular for interiors.

How fast can retrofit covers be made? Typical fabrication lead time is 3 to 4 weeks, or about 6 to 8 weeks when drafting (shop drawings) is included.

Get a retrofit column cover quote

Send photos and field dimensions of each column type, heights, quantities, the joint type you prefer, and material and finish. Call (952) 938-3356, email sales@sure-panel.com or use the contact page. See all options on Sure-Panel® column covers.

Related articles

 
 
 

Comments


(952) 938-3356

11901 Riverwood Dr, Burnsville, MN 55337

©2026 Sure-Panel® a CNC Metalcraft® Company

  • Instagram
  • LinkedIn
bottom of page