
PVDF, Anodized or Powder Coat? Choosing a Finish for Metal Panels and Column Covers

The finish is the part of a metal panel everyone sees, and the part owners judge for decades. It also affects which material you can use, what the warranty looks like and how easy it is to match colors across a building. This guide walks through the finishes available on Sure-Panel® composite panels, plate panels and column covers, and how architects typically choose between them.
The short version
PVDF (Kynar 500 / Hylar 5000): Where Sure-Panel® offers it: Coil-coated ACM, column covers; Typical reason to choose it: Exterior color and gloss retention, widest color range
Anodized (Class I): Where Sure-Panel® offers it: ACM and column covers (5005 anodic-quality aluminum); Typical reason to choose it: Metallic look that is part of the metal itself
Powder coat: Where Sure-Panel® offers it: Column covers; Typical reason to choose it: Interior or specialty color needs
Brushed stainless: Where Sure-Panel® offers it: Stainless column covers; Typical reason to choose it: Natural metal look in 304 or 316 stainless
Mill or primed: Where Sure-Panel® offers it: Column covers; Typical reason to choose it: Field-painted or concealed conditions
PVDF (Kynar) coatings
PVDF, often called by the resin trade names Kynar 500 or Hylar 5000, is the standard exterior finish on architectural aluminum. Sure-Panel® PVDF coil coatings are offered to AAMA 2605 or AAMA 2604. AAMA 2605 is the most demanding of the voluntary AAMA specifications for organic coatings on architectural aluminum, and 2604 is the next level down, so specifying the AAMA level is the simplest way to set your performance expectation.
Why architects pick PVDF:
Color range. Standard and custom colors, including solids, metallics and micas. Projects on our site range from Colonial Red to Silver Metallic on the Hennepin County South Regional Service Center, which uses five Reynobond colors.
Consistency. On ACM, the coating is factory-applied to the coil, so large areas come from controlled production.
Exterior durability. PVDF is the usual choice for full facades.
For coil-coated ACM, the finish warranty follows the ACM manufacturer's warranty. Sure-Panel® fabricates Alucobond, Alfrex, Reynobond, Etalbond and ALPOLIC ACM.
Post-painted finishes
Not every part starts as pre-finished coil. Post-painted finishes for Sure-Panel® plate panels are applied by Linetec after fabrication and carry a 20-year finish warranty. Post-painting is useful when a part is formed in a way that pre-finished coil cannot follow, or when a custom color has to be produced for a specific project.
Anodized finishes
Anodizing is an electrochemical process that grows a protective oxide layer out of the aluminum itself, rather than adding a coating on top. The result has a metallic, slightly variable look that many designers value. Sure-Panel® offers Class I anodized finishes. For column covers, anodized parts use 5005 anodic-quality aluminum from .090" to .125", the alloy chosen because it anodizes evenly.
Things to know about anodized work:
Expect some natural variation in tone between sheets and batches. Ask for range samples.
Plan anodized parts together so they come from consistent material.
The color palette is narrower than PVDF.
Powder coat
Powder coat is a dry powder applied electrostatically and cured with heat. It is listed as a column cover finish in the Sure-Panel® specification and suits interior columns and specialty color needs. For full exterior facades, most specifications call for PVDF.
Stainless, mill and primed
Brushed stainless: available on 16 gauge 304 or 316 stainless column covers. The finish is the metal itself.
Mill: the bare as-produced finish, used where the part will be concealed or finished later.
Primed: for covers that will be field-painted to match another trade.
How to choose: a quick decision path
Is it exterior? Start with PVDF to AAMA 2605 unless the design calls for anodized or stainless.
Is it a natural metal look? Consider anodized aluminum or brushed stainless.
Is it a feature color or interior column? PVDF still works; powder coat is an option for column covers.
Does it have to match other trades? Consider a post-painted finish, or primed for field paint.
Do you want accent reveals? On the Sure-Panel® rainscreen, reveals can be a different color from the panels.
Matching colors across materials
Many buildings mix ACM fields, aluminum plate at the ground floor and column covers at the entry. Coil-coated ACM, post-painted plate and powder-coated covers are made by different processes, so an exact match is not automatic. Ask for samples of each material in the selected color, and approve them side by side. Our ACM vs. aluminum plate guide explains where each material usually goes.
Finish FAQ
What is the most common exterior finish for ACM? PVDF coil coating. Sure-Panel® offers PVDF to AAMA 2605 or 2604.
What warranty comes with the finish? Coil-coated ACM finish warranties follow the sheet manufacturer. Linetec post-painted finishes carry a 20-year finish warranty. Sure-Panel® fabrication carries a 1-year warranty.
Can column covers be anodized? Yes, using 5005 anodic-quality aluminum from .090" to .125".
Do you offer custom colors? Yes. Standard and custom colors are available across Sure-Panel® systems.
Request finish samples or a quote
Tell us the system, material, finish and color you are considering, and we will help you narrow it down. Call (952) 938-3356, email sales@sure-panel.com or use the contact page. Panels and covers are fabricated by CNC Metalcraft® in Burnsville, Minnesota. Explore composite panels, plate panels and column covers.
Related articles
How to Specify Metal Column Covers: A Section 05 58 13 Checklist
Column Covers Taller Than 15 Feet: How Stacked Sections Work
Retrofit Column Covers: How to Clad Existing Columns in a Renovation
Interior vs. Exterior Column Covers: Choosing Joint, Material and Finish
What to Send for an Accurate Metal Panel Quote: A Checklist for GCs and Architects




Comments