top of page
Building entrance with glass facade and canopy - Sure-Panel® column covers

Column Covers

Sure-Panel® column covers and beam wraps conceal structural supports in aluminum or ACM. They are fabricated in round, square, rectangular, and custom profiles, with hairline, reveal, or caulk joints, and are manufactured in Burnsville, Minnesota by CNC Metalcraft®.

Material:

  • .125 Aluminum

  • ACM

​

Features:​

  • 8” Minimum diameter

  • 15’ Maximum length

​

Sure-Panel® Hairline Joint

Rough edges, fasteners, adhesives and caulk are all veiled with the utilization of an internal key-slot system. Installed column covers have a subtle hairline joint producing a clean finished look.

Sure-Panel® column cover hairline joint profile
Sure-Panel® column cover channel joint profile

Sure-Panel® Reveal Joint

Dry-Joint Channel System uses clips that are mechanically fastened to the panels and the underlying substructure. With no exposed rough edges, fasteners, adhesives or caulk, this system uses a “C” Channel insert for the vertical reveal to create a perfectly clean appearance.

Sure-Panel® Caulk Joint

Caulk joint systems take advantage of mounting clips mechanically fastened to rout and return column legs. Clips are then hard fastened to underlying structures for the most solid installation possible. Joints are sealed with foam backer rod and silicone-based caulk for fastener masking and outstanding weather protection.

Sure-Panel® column cover caulk joint profile

Sure-Panel column covers are offered in three joint types. Each has its own page with specs and details.

Joint types: hairline joint, reveal joint and caulk joint.

Guides: column cover sizing guide and specs and CAD details.

Projects: Navy Pier and Federal Reserve Bank of Minneapolis.

Also see: Sure-Panel as an alternative for ACM, plate and column cover projects.

Design considerations

  • Choose the joint to match the facade: hairline when the seam should nearly disappear, reveal when a uniform vertical joint should line up with a dry-joint rainscreen, and caulk when a sealed exterior joint is required.

  • Confirm diameter and length early. Covers longer than 15 feet need a stack joint. Round covers over 34 inches, and square covers over 26 inches, need vertical joints.

  • Call out capitals, bases, rings, or reveals, and whether the cover should be perforated for lighting.

  • Select ACM, aluminum plate, or stainless from the list above, along with the finish.

  • For a quote, send column shape and size, height, quantity, joint type, material and finish, and any capitals, bases, or rings.

How we fabricate

Sure-Panel® column covers are manufactured by CNC Metalcraft®, an architectural metal fabricator in Burnsville, Minnesota, with over 75,000 sq ft across two buildings. The shop prepares shop drawings, CNC-routes and fabricates the covers, and crates them for the job site. Finished work ships nationwide.

Column cover FAQ

What shapes and sizes can you fabricate?

Round, square, rectangular, and custom profiles, plus beam wraps. The minimum diameter is 8 inches. The maximum one-piece length is 15 feet; longer covers need a stack joint. Round covers over 34 inches in diameter, and square covers over 26 inches, require vertical joints.

What materials are available?

ACM in 4 mm or 6 mm, from Alucobond, Alfrex, Reynobond, Etalbond, and ALPOLIC; aluminum plate in .080, .090, and .125 inch; and 16 gauge stainless in 304 or 316.

What joint types are available?

Hairline, reveal, and caulk. Each has its own page with details, and 3-part specs are on the Specs & CAD page.

What is the fabrication lead time?

Typical fabrication lead time is 3 to 4 weeks, or about 6 to 8 weeks when drafting (shop drawings) is included.

Do you ship nationwide?

Yes. Covers are crated in Burnsville, MN, and shipped nationwide.

Do you offer FR and PE core ACM?

Yes. ACM is offered with a fire-retardant (FR) or polyethylene (PE) core. FR is the usual specification. Column cover pages list 4 mm and 6 mm ACM.

Do you have CAD or Revit details?

PDF specifications and details for all three column-cover joints are on the Specs & CAD page. CAD and Revit details are available on request.

Who manufactures Sure-Panel® column covers?

CNC Metalcraft®, an architectural metal fabricator in Burnsville, Minnesota. See cncmetalcraft.com/column-cover-systems.

(952) 938-3356

11901 Riverwood Dr, Burnsville, MN 55337

©2026 Sure-Panel® a CNC Metalcraft® Company

  • Instagram
  • LinkedIn
bottom of page