Sure-Panel Metal Panel FAQ

What is Sure-Panel?

Sure-Panel is a line of architectural metal panel systems, including aluminum composite panels, aluminum plate panels, column covers, phenolic panels, S-Lock tile panels and architectural extrusions, made by CNC Metalcraft in Burnsville, Minnesota.

What is the difference between dry joint rainscreen and wet seal?

Sure-Panel Rainscreen panels install on a proprietary aluminum extrusion with open joints, no caulking and no exposed fasteners. Sure-Panel Wet Seal panels use mechanically fastened clips and joints sealed with silicone-based caulk.

What sizes do Sure-Panel composite panels come in?

Aluminum composite panels are typically 3, 4 or 6 mm thick, with a maximum panel size of 59 by 193 inches. Panels can be flat or radius.

What core options are available for ACM?

Sure-Panel offers both fire-retardant (FR) and polyethylene (PE) core ACM. Most architects specify FR core today.

What thickness is Sure-Panel aluminum plate?

Aluminum plate panels range from .063 to .250 inch. Stainless steel plate is available in 18, 16, 14 and 11 gauge. Maximum size is 59 by 193 inches.

What column cover joints do you offer?

Three: Hairline Joint (internal key-slot system), Reveal Joint (dry-joint channel system with a C-channel insert) and Caulk Joint (backer rod and silicone sealant).

What is the minimum column cover diameter?

8 inches. Maximum length is 15 feet, round or square; longer covers require a stack joint.

What finishes are available?

PVDF (Kynar 500 / Hylar 5000) coil coatings to AAMA 2605 or 2604, Class I anodized finishes, and a wide range of standard and custom colors. Column covers are also offered in powder coat, brushed stainless and mill.

Where do I get specs and CAD details?

On the Sure-Panel Specs & CAD page, which has 3-part specifications in CSI format and CAD details.

How much does Sure-Panel ACM cost?

ACM fabrication starts from $6 per square foot (fabrication only). Your project price depends on size, system and finish; send drawings for a quote.

What is your lead time?

Fabrication in as little as 3 to 4 weeks, or about 6 to 8 weeks including drafting (shop drawings).

Do you ship outside Minnesota?

Yes. Sure-Panel ships nationwide.

What warranty comes with Sure-Panel?

The finish warranty follows the ACM manufacturer's warranty. Post-painted finishes by Linetec carry a 20-year finish warranty. Sure-Panel fabrication carries a 1-year warranty.

Is Sure-Panel tested?

Yes. Sure-Panel's ACM rainscreen system has been independently tested since 2008 (AAMA 508-07). In testing by Braun Intertec (report dated April 4, 2008), the Sure-Panel ACM rain screen specimen met the requirements of AAMA 508-07 for static air infiltration (ASTM E283: under 0.1 CFM at 1.57, 6.24 and 10 psf), water penetration (ASTM E331: pass at 15.00 psf) and structural performance (ASTM E330: pass at plus and minus 20 to 60 psf). Dynamic water penetration testing was not performed. The report is available on request.

Which ACM brands do you fabricate?

Alucobond, Alfrex, Reynobond, Etalbond and ALPOLIC.

Do you have CAD or Revit details?

Specifications and PDF details for ACM rainscreen, aluminum plate dry joint and all three column cover joints are on our Specs & CAD page. CAD and Revit details are available on request.

How are Sure-Panel column covers installed?

Base angles are located at 24 inches on center maximum with PVC shims under the clips to separate dissimilar metals. Clip angles are fastened to the base angles at the depth shown on the shop drawings. The male half of the column is attached to the clips, set 3/4 inch below the ceiling with the bottom ring 1/4 inch above the floor; the female half engages bolts into keyhole slots. Job-specific details govern. See the Column Cover Installation and Storage Guide.

Where are Sure-Panel products made?

Sure-Panel products are fabricated by CNC Metalcraft at 11901 Riverwood Dr, Burnsville, Minnesota 55337.